This job view page is being replaced by Spyglass soon. Check out the new job view.
ResultFAILURE
Tests 91 failed / 958 succeeded
Started2019-08-28 12:02
Elapsed2h46m
Revision
Buildergke-scalability-build-cpu16-disk1000-d2de3eff-w3sm
pod95f7d479-c98b-11e9-8465-5e279c0e660a
infra-commitf59a3ca37
job-versionv1.17.0-alpha.0.788+f0be447922224c
master_os_imagecos-73-11647-163-0
node_os_imagecos-73-11647-163-0
pod95f7d479-c98b-11e9-8465-5e279c0e660a
revisionv1.17.0-alpha.0.788+f0be447922224c

Test Failures


Kubernetes e2e suite [sig-network] Services should only allow access from service loadbalancer source ranges [Slow] 23m53s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-network\]\sServices\sshould\sonly\sallow\saccess\sfrom\sservice\sloadbalancer\ssource\sranges\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:152
Aug 28 12:55:27.808: Couldn't delete ns: "services-2659": namespace services-2659 was not deleted with limit: timed out waiting for the condition, namespaced content other than pods remain (&errors.errorString{s:"namespace services-2659 was not deleted with limit: timed out waiting for the condition, namespaced content other than pods remain"})
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:336
				
				Click to see stdout/stderrfrom junit_13.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-network] Services should only allow access from service loadbalancer source ranges [Slow] 37m36s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-network\]\sServices\sshould\sonly\sallow\saccess\sfrom\sservice\sloadbalancer\ssource\sranges\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:152
Aug 28 13:33:04.769: Couldn't delete ns: "services-8142": namespace services-8142 was not deleted with limit: timed out waiting for the condition, namespaced content other than pods remain (&errors.errorString{s:"namespace services-8142 was not deleted with limit: timed out waiting for the condition, namespaced content other than pods remain"})
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/framework/framework.go:336
				
				Click to see stdout/stderrfrom junit_13.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should be able to unmount after the subpath directory is deleted 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sbe\sable\sto\sunmount\safter\sthe\ssubpath\sdirectory\sis\sdeleted$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:425
Aug 28 12:49:25.688: Unexpected error:
    <*errors.errorString | 0xc007a162b0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0g5pch] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0g5pch] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_15.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath directory is outside the volume [Slow] 5m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\sdirectory\sis\soutside\sthe\svolume\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:223
Aug 28 12:40:00.676: Unexpected error:
    <*errors.errorString | 0xc000394300>: {
        s: "PersistentVolumeClaims [csi-hostpath-v05x5zv] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v05x5zv] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_04.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath directory is outside the volume [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\sdirectory\sis\soutside\sthe\svolume\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:223
Aug 28 12:45:30.087: Unexpected error:
    <*errors.errorString | 0xc00e2479f0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v068966] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v068966] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_04.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support creating multiple subpath from same volumes [Slow] 5m28s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\screating\smultiple\ssubpath\sfrom\ssame\svolumes\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:277
Aug 28 12:50:42.916: Unexpected error:
    <*errors.errorString | 0xc00d787310>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0bbwnn] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0bbwnn] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_37.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing directories when readOnly specified in the volumeSource 5m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectories\swhen\sreadOnly\sspecified\sin\sthe\svolumeSource$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:377
Aug 28 12:40:29.552: Unexpected error:
    <*errors.errorString | 0xc00849e4b0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0dj5p2] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0dj5p2] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_19.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing directories when readOnly specified in the volumeSource 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectories\swhen\sreadOnly\sspecified\sin\sthe\svolumeSource$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:377
Aug 28 12:35:02.351: Unexpected error:
    <*errors.errorString | 0xc007eb2ba0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0xwtpr] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0xwtpr] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_19.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing directory 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectory$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:188
Aug 28 12:34:37.900: Unexpected error:
    <*errors.errorString | 0xc01ba58750>: {
        s: "PersistentVolumeClaims [csi-hostpath-v02r8wz] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v02r8wz] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_14.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing directory 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectory$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:188
Aug 28 12:40:07.417: Unexpected error:
    <*errors.errorString | 0xc01c039320>: {
        s: "PersistentVolumeClaims [csi-hostpath-v02dplg] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v02dplg] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_14.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing single file [LinuxOnly] 5m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\ssingle\sfile\s\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:202
Aug 28 12:35:48.478: Unexpected error:
    <*errors.errorString | 0xc00440e810>: {
        s: "PersistentVolumeClaims [csi-hostpath-v09mnfk] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v09mnfk] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_03.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support existing single file [LinuxOnly] 5m27s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\ssingle\sfile\s\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:202
Aug 28 12:30:20.889: Unexpected error:
    <*errors.errorString | 0xc002822620>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0h5xxz] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0h5xxz] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_03.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sreadOnly\sfile\sspecified\sin\sthe\svolumeMount\s\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:362
Aug 28 12:47:08.575: Unexpected error:
    <*errors.errorString | 0xc002d13570>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0zt2hg] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0zt2hg] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_23.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support readOnly file specified in the volumeMount [LinuxOnly] 5m31s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sreadOnly\sfile\sspecified\sin\sthe\svolumeMount\s\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:362
Aug 28 12:41:37.124: Unexpected error:
    <*errors.errorString | 0xc022f9c9d0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0fwlwd] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0fwlwd] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_23.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support restarting containers using file as subpath [Slow][LinuxOnly] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\srestarting\scontainers\susing\sfile\sas\ssubpath\s\[Slow\]\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:318
Aug 28 12:36:21.118: Unexpected error:
    <*errors.errorString | 0xc00bcae450>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0ws7md] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0ws7md] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_07.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should support restarting containers using file as subpath [Slow][LinuxOnly] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\srestarting\scontainers\susing\sfile\sas\ssubpath\s\[Slow\]\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:318
Aug 28 12:41:50.366: Unexpected error:
    <*errors.errorString | 0xc00aa17cd0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0dk8dm] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0dk8dm] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_07.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should verify container cannot write to subpath readonly volumes [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sverify\scontainer\scannot\swrite\sto\ssubpath\sreadonly\svolumes\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:405
Aug 28 12:35:45.014: Unexpected error:
    <*errors.errorString | 0xc01747d710>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0c2nj5] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0c2nj5] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_11.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] subPath should verify container cannot write to subpath readonly volumes [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sverify\scontainer\scannot\swrite\sto\ssubpath\sreadonly\svolumes\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:405
Aug 28 12:41:14.506: Unexpected error:
    <*errors.errorString | 0xc003b62190>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0ph4vs] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0ph4vs] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_11.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] volumeIO should write files of various sizes, verify size, validate content [Slow] 5m28s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\svolumeIO\sshould\swrite\sfiles\sof\svarious\ssizes\,\sverify\ssize\,\svalidate\scontent\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volume_io.go:137
Aug 28 12:34:01.285: Unexpected error:
    <*errors.errorString | 0xc018cb0df0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0zf4fl] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0zf4fl] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_20.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] volumeIO should write files of various sizes, verify size, validate content [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\svolumeIO\sshould\swrite\sfiles\sof\svarious\ssizes\,\sverify\ssize\,\svalidate\scontent\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volume_io.go:137
Aug 28 12:39:30.304: Unexpected error:
    <*errors.errorString | 0xc0131ad210>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0pcdtf] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0pcdtf] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_20.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (default fs)] volumes should store data 5m28s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\svolumes\sshould\sstore\sdata$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volumes.go:146
Aug 28 12:19:42.659: Unexpected error:
    <*errors.errorString | 0xc0030cfc90>: {
        s: "PersistentVolumeClaims [csi-hostpath-v07sd5k] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v07sd5k] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_16.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (filesystem volmode)] multiVolume [Slow] should access to two volumes with the same volume mode and retain data across pod recreation on the same node 5m22s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(filesystem\svolmode\)\]\smultiVolume\s\[Slow\]\sshould\saccess\sto\stwo\svolumes\swith\sthe\ssame\svolume\smode\sand\sretain\sdata\sacross\spod\srecreation\son\sthe\ssame\snode$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/multivolume.go:124
Aug 28 12:43:43.157: Unexpected error:
    <*errors.errorString | 0xc02b8febb0>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0bhnsc] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0bhnsc] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_29.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath-v0] [Testpattern: Dynamic PV (filesystem volmode)] multiVolume [Slow] should access to two volumes with the same volume mode and retain data across pod recreation on the same node 5m31s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\-v0\]\s\[Testpattern\:\sDynamic\sPV\s\(filesystem\svolmode\)\]\smultiVolume\s\[Slow\]\sshould\saccess\sto\stwo\svolumes\swith\sthe\ssame\svolume\smode\sand\sretain\sdata\sacross\spod\srecreation\son\sthe\ssame\snode$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/multivolume.go:124
Aug 28 12:38:12.408: Unexpected error:
    <*errors.errorString | 0xc006a75e90>: {
        s: "PersistentVolumeClaims [csi-hostpath-v0jqk6n] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath-v0jqk6n] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_29.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] multiVolume [Slow] should concurrently access the single volume from pods on the same node 5m42s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\smultiVolume\s\[Slow\]\sshould\sconcurrently\saccess\sthe\ssingle\svolume\sfrom\spods\son\sthe\ssame\snode$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/multivolume.go:276
Aug 28 12:20:21.634: Unexpected error:
    <*errors.errorString | 0xc00446f8c0>: {
        s: "pod \"security-context-a4f6072d-856a-4d40-aef7-b8b7c777392e\" is not Running: timed out waiting for the condition",
    }
    pod "security-context-a4f6072d-856a-4d40-aef7-b8b7c777392e" is not Running: timed out waiting for the condition
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/multivolume.go:414
				
				Click to see stdout/stderrfrom junit_07.xml

Find security-context-a4f6072d-856a-4d40-aef7-b8b7c777392e mentions in log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] volume-expand should not allow expansion of pvcs without AllowVolumeExpansion property 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\svolume\-expand\sshould\snot\sallow\sexpansion\sof\spvcs\swithout\sAllowVolumeExpansion\sproperty$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volume_expand.go:139
Aug 28 12:25:01.117: Unexpected error:
    <*errors.errorString | 0xc00ad02840>: {
        s: "PersistentVolumeClaims [csi-hostpath8jswn] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath8jswn] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_25.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] volumeMode should fail to use a volume in a pod with mismatched mode [Slow] 5m30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\svolumeMode\sshould\sfail\sto\suse\sa\svolume\sin\sa\spod\swith\smismatched\smode\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volumemode.go:277
Aug 28 12:19:46.915: Unexpected error:
    <*errors.errorString | 0xc0045c9cc0>: {
        s: "PersistentVolumeClaims [csi-hostpath2m4dr] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath2m4dr] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_13.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (block volmode)] volumes should store data 5m30s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(block\svolmode\)\]\svolumes\sshould\sstore\sdata$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/volumes.go:146
Aug 28 12:50:52.369: Unexpected error:
    <*errors.errorString | 0xc00e595b00>: {
        s: "PersistentVolumeClaims [csi-hostpath6vj4p] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpath6vj4p] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_33.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath directory is outside the volume [Slow] 5m31s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\sdirectory\sis\soutside\sthe\svolume\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:223
Aug 28 12:49:40.441: Unexpected error:
    <*errors.errorString | 0xc0172bd100>: {
        s: "PersistentVolumeClaims [csi-hostpathbwzlr] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathbwzlr] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_24.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath file is outside the volume [Slow][LinuxOnly] 5m28s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\sfile\sis\soutside\sthe\svolume\s\[Slow\]\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:239
Aug 28 12:30:59.610: Unexpected error:
    <*errors.errorString | 0xc00ba0d350>: {
        s: "PersistentVolumeClaims [csi-hostpathhd9pn] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathhd9pn] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_26.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath file is outside the volume [Slow][LinuxOnly] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\sfile\sis\soutside\sthe\svolume\s\[Slow\]\[LinuxOnly\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:239
Aug 28 12:36:28.938: Unexpected error:
    <*errors.errorString | 0xc00cdb77f0>: {
        s: "PersistentVolumeClaims [csi-hostpathxm2ht] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathxm2ht] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_26.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath with backstepping is outside the volume [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\swith\sbackstepping\sis\soutside\sthe\svolume\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:261
Aug 28 12:42:58.712: Unexpected error:
    <*errors.errorString | 0xc024438ac0>: {
        s: "PersistentVolumeClaims [csi-hostpathpjpmq] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathpjpmq] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_06.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should fail if subpath with backstepping is outside the volume [Slow] 5m29s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\sfail\sif\ssubpath\swith\sbackstepping\sis\soutside\sthe\svolume\s\[Slow\]$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:261
Aug 28 12:48:28.561: Unexpected error:
    <*errors.errorString | 0xc00fc6f180>: {
        s: "PersistentVolumeClaims [csi-hostpathpqb77] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathpqb77] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366
				
				Click to see stdout/stderrfrom junit_06.xml

Filter through log files | View test history on testgrid


Kubernetes e2e suite [sig-storage] CSI Volumes [Driver: csi-hostpath] [Testpattern: Dynamic PV (default fs)] subPath should support existing directory 5m28s

go run hack/e2e.go -v --test --test_args='--ginkgo.focus=Kubernetes\se2e\ssuite\s\[sig\-storage\]\sCSI\sVolumes\s\[Driver\:\scsi\-hostpath\]\s\[Testpattern\:\sDynamic\sPV\s\(default\sfs\)\]\ssubPath\sshould\ssupport\sexisting\sdirectory$'
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/subpath.go:188
Aug 28 12:42:07.135: Unexpected error:
    <*errors.errorString | 0xc002506ca0>: {
        s: "PersistentVolumeClaims [csi-hostpathwb6kc] not all in phase Bound within 5m0s",
    }
    PersistentVolumeClaims [csi-hostpathwb6kc] not all in phase Bound within 5m0s
occurred
/go/src/k8s.io/kubernetes/_output/dockerized/go/src/k8s.io/kubernetes/test/e2e/storage/testsuites/base.go:366